KW coilover V1 102100DL for VW GOLF VIII

Custom production after receipt of order

Delivery time 10-14 working days

Special Price €1,315.90 Regular Price €1,356.13
Incl. 19% VAT, excl. Shipping Cost
In stock
SKU
KWGEWINDE_102100DL_VOLK
Delivery time
2-3 Days
KW coilover V1 102100DL for VW GOLF VIII
Scope of delivery: Set FA+RA
Clamp diameter (in mm): 55

KW coilover V1 102100DL for VW GOLF VIII

The KW coilover kit Variant 1 “inox-line” is the ideal entry-level system for customers who want the technically lowest possible suspension setting or for those who want to customize their own. In extensive road tests, our experienced engineers developed a target group - specific setup by establishing an optimum balance of sportiness, comfort and safety and then implementing this in the series.

Setup – factory-set pre-configured damping setup

The Variant 1 "inox-line" has a vehicle-specific, fix configured damping setup with a sporty and harmonious adjustment, which allows you to experience an optimal balance of sportiness and everyday practicality. Even with full payload and maximum axle loads, the dampers always work with a sporty characteristic.

Continuously lowering

The KW Variant 1 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after years.

The benchmark for coilovers

As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit. After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 1 “inox-line”, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.

KW experiences for your driving pleasure

For more than 20 years, KW as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”. Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in KW company headquarters in Fichtenberg in order to meet the high standards of KW quality management

  • customized suspension lowering
  • trapezoidal thread
  • stainless steel "inox-line"
  • 7-post drive dynamics tested
  • TÜV technical component report
  • friction-optimized polyamide spring seat
  • ManufacturerModelTypeLowering in mm (FA/RA)Axle load (FA/RA)Four wheel drive?
    VWGOLF VIII (CD1) 07/2019-1.4 GTE 110kw40-60/40-65-1095/-1110👎
    VWGOLF VIII (CD1) 07/2019-1.4 GTE PLUG-IN HYBRID 132kw40-60/40-65-1095/-1110👎
    Manufacturer: kw
    Clamp diameter (in mm): 55

    Scope of delivery: Set FA+RA = Front axle: coilover struts; Rear axle: springs with height adjustment + dampers

    EAN: 4251778304173
    MPN: 102100DL
    SKU: KWGEWINDE_102100DL_VOLK
    Scope of delivery: Set FA+RA = Front axle: coilover struts; Rear axle: springs with height adjustment + dampers
    2 - Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)
    37 - For cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list
    57 - Only for cars with a clamp diameter of 55mm on the front axle
    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account

    KW coilover V1 102100DL for VW GOLF VIII

    The KW coilover kit Variant 1 “inox-line” is the ideal entry-level system for customers who want the technically lowest possible suspension setting or for those who want to customize their own. In extensive road tests, our experienced engineers developed a target group - specific setup by establishing an optimum balance of sportiness, comfort and safety and then implementing this in the series.

    Setup – factory-set pre-configured damping setup

    The Variant 1 "inox-line" has a vehicle-specific, fix configured damping setup with a sporty and harmonious adjustment, which allows you to experience an optimal balance of sportiness and everyday practicality. Even with full payload and maximum axle loads, the dampers always work with a sporty characteristic.

    Continuously lowering

    The KW Variant 1 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after years.

    The benchmark for coilovers

    As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit. After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 1 “inox-line”, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.

    KW experiences for your driving pleasure

    For more than 20 years, KW as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”. Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in KW company headquarters in Fichtenberg in order to meet the high standards of KW quality management

  • customized suspension lowering
  • trapezoidal thread
  • stainless steel "inox-line"
  • 7-post drive dynamics tested
  • TÜV technical component report
  • friction-optimized polyamide spring seat
  • ManufacturerModelTypeLowering in mm (FA/RA)Axle load (FA/RA)Four wheel drive?
    VWGOLF VIII (CD1) 07/2019-1.4 GTE 110kw40-60/40-65-1095/-1110👎
    VWGOLF VIII (CD1) 07/2019-1.4 GTE PLUG-IN HYBRID 132kw40-60/40-65-1095/-1110👎
    Manufacturer: kw
    Clamp diameter (in mm): 55

    Scope of delivery: Set FA+RA = Front axle: coilover struts; Rear axle: springs with height adjustment + dampers

    EAN: 4251778304173
    MPN: 102100DL
    SKU: KWGEWINDE_102100DL_VOLK
    Scope of delivery: Set FA+RA = Front axle: coilover struts; Rear axle: springs with height adjustment + dampers
    2 - Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)
    37 - For cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list
    57 - Only for cars with a clamp diameter of 55mm on the front axle
    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account
    Questions
    No Questions
    KW Onlineshop Logo

    KW coilovers online shop - all KW coilovers at low prices

    We are an authorized KW partner and offer the entire KW range. Regardless of whether you opt for a height-adjustable KW V1 - V5 coilover suspension, a KW DDC coilover suspension or a KW Clubsport suspension with adjustable top mounts. TUNERSHOP is THE online shop for your new KW coilover kit.

    For more than 15 years, KW has been the market leader and innovation driver as a manufacturer of individual suspension solutions for the road and in racing. No matter where in the world, sporty drivers, automobile manufacturers and refiners trust in KW coilovers "Made in Germany". Every KW coilover kit is subjected to extensive stress tests in production and developed and manufactured directly at the company headquarters in Fichtenberg, Germany, in order to meet the high standards of KW quality management.