KW coilover V1 10220020 for BMW 5er
Custom production after receipt of order
Delivery time 10-14 working days
Special Price €1,599.85 Regular Price €1,648.87
Incl. 19% VAT, excl. Shipping Cost
In stock
SKU
KWGEWINDE_10220020_BMW
Delivery time
2-3 Days
KW coilover V1 10220020 for BMW 5er
Scope of delivery: Set FA+RA
KW coilover V1 10220020 for BMW 5er
The KW coilover kit Variant 1 “inox-line” is the ideal entry-level system for customers who want the technically lowest possible suspension setting or for those who want to customize their own. In extensive road tests, our experienced engineers developed a target group - specific setup by establishing an optimum balance of sportiness, comfort and safety and then implementing this in the series.Setup – factory-set pre-configured damping setup
The Variant 1 "inox-line" has a vehicle-specific, fix configured damping setup with a sporty and harmonious adjustment, which allows you to experience an optimal balance of sportiness and everyday practicality. Even with full payload and maximum axle loads, the dampers always work with a sporty characteristic.
Continuously lowering
The KW Variant 1 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after years.
The benchmark for coilovers
As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit. After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 1 “inox-line”, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.
KW experiences for your driving pleasure
For more than 20 years, KW as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”. Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in KW company headquarters in Fichtenberg in order to meet the high standards of KW quality management
| Manufacturer | Model | Type | Lowering in mm (FA/RA) | Axle load (FA/RA) | Four wheel drive? |
| BMW | 5er (E34) 5/H M5/H X5/H 02/1987-12/1995 | M5 232kw | 25-55/25-55 | -1050/-1300 | 👎 |
| BMW | 5er (E34) 5/H M5/H X5/H 02/1987-12/1995 | M5 250kw | 25-55/25-55 | -1050/-1300 | 👎 |
| BMW | 5er (E34) 5/H M5/H X5/H 02/1987-12/1995 | M5 Cat 232kw | 25-55/25-55 | -1050/-1300 | 👎 |
Manufacturer: kw
Scope of delivery: Set FA+RA = Set front + rear axle coilover struts
EAN: 4250173300995
MPN: 10220020
SKU: KWGEWINDE_10220020_BMW
Scope of delivery: Set FA+RA = Set front + rear axle coilover struts
1 - Height adjustable on the front and rear axles (threaded strut housings)
6 - When using original tires, wheel offset spacers may be required
9 - The automatic level control must be disabled
18 - For front dome bearing caps with a diameter of 80 mm, new parts are required. (BMW Part No.: dome bearings 31 331 139 452 + washer 31 331 116 983 + collar 31 331 110 196)
38 - If the rear axle shock absorber of the car is equipped with M12 thread - you need to modify the supporting bearing unit to M10 thread. Therefore please buy the following BMW parts from the car manufacturer: supporting bearing 33 52 1 132 270, washer disc 33 52 1 136 063, disc 33 52 1 129 565
40 - Original struts need to be sent in advance for modification
41 - Coilover kits where the strut housings are delivered on exchange basis are only available in galvanized finish
62 - Not for cars with electronic damping
82 - Production on demand. Please ask for delivery time.
6 - When using original tires, wheel offset spacers may be required
9 - The automatic level control must be disabled
18 - For front dome bearing caps with a diameter of 80 mm, new parts are required. (BMW Part No.: dome bearings 31 331 139 452 + washer 31 331 116 983 + collar 31 331 110 196)
38 - If the rear axle shock absorber of the car is equipped with M12 thread - you need to modify the supporting bearing unit to M10 thread. Therefore please buy the following BMW parts from the car manufacturer: supporting bearing 33 52 1 132 270, washer disc 33 52 1 136 063, disc 33 52 1 129 565
40 - Original struts need to be sent in advance for modification
41 - Coilover kits where the strut housings are delivered on exchange basis are only available in galvanized finish
62 - Not for cars with electronic damping
82 - Production on demand. Please ask for delivery time.
Write Your Own Review
KW coilover V1 10220020 for BMW 5er
The KW coilover kit Variant 1 “inox-line” is the ideal entry-level system for customers who want the technically lowest possible suspension setting or for those who want to customize their own. In extensive road tests, our experienced engineers developed a target group - specific setup by establishing an optimum balance of sportiness, comfort and safety and then implementing this in the series.Setup – factory-set pre-configured damping setup
The Variant 1 "inox-line" has a vehicle-specific, fix configured damping setup with a sporty and harmonious adjustment, which allows you to experience an optimal balance of sportiness and everyday practicality. Even with full payload and maximum axle loads, the dampers always work with a sporty characteristic.
Continuously lowering
The KW Variant 1 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after years.
The benchmark for coilovers
As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit. After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 1 “inox-line”, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.
KW experiences for your driving pleasure
For more than 20 years, KW as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”. Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in KW company headquarters in Fichtenberg in order to meet the high standards of KW quality management
| Manufacturer | Model | Type | Lowering in mm (FA/RA) | Axle load (FA/RA) | Four wheel drive? |
| BMW | 5er (E34) 5/H M5/H X5/H 02/1987-12/1995 | M5 232kw | 25-55/25-55 | -1050/-1300 | 👎 |
| BMW | 5er (E34) 5/H M5/H X5/H 02/1987-12/1995 | M5 250kw | 25-55/25-55 | -1050/-1300 | 👎 |
| BMW | 5er (E34) 5/H M5/H X5/H 02/1987-12/1995 | M5 Cat 232kw | 25-55/25-55 | -1050/-1300 | 👎 |
Manufacturer: kw
Scope of delivery: Set FA+RA = Set front + rear axle coilover struts
EAN: 4250173300995
MPN: 10220020
SKU: KWGEWINDE_10220020_BMW
Scope of delivery: Set FA+RA = Set front + rear axle coilover struts
1 - Height adjustable on the front and rear axles (threaded strut housings)
6 - When using original tires, wheel offset spacers may be required
9 - The automatic level control must be disabled
18 - For front dome bearing caps with a diameter of 80 mm, new parts are required. (BMW Part No.: dome bearings 31 331 139 452 + washer 31 331 116 983 + collar 31 331 110 196)
38 - If the rear axle shock absorber of the car is equipped with M12 thread - you need to modify the supporting bearing unit to M10 thread. Therefore please buy the following BMW parts from the car manufacturer: supporting bearing 33 52 1 132 270, washer disc 33 52 1 136 063, disc 33 52 1 129 565
40 - Original struts need to be sent in advance for modification
41 - Coilover kits where the strut housings are delivered on exchange basis are only available in galvanized finish
62 - Not for cars with electronic damping
82 - Production on demand. Please ask for delivery time.
6 - When using original tires, wheel offset spacers may be required
9 - The automatic level control must be disabled
18 - For front dome bearing caps with a diameter of 80 mm, new parts are required. (BMW Part No.: dome bearings 31 331 139 452 + washer 31 331 116 983 + collar 31 331 110 196)
38 - If the rear axle shock absorber of the car is equipped with M12 thread - you need to modify the supporting bearing unit to M10 thread. Therefore please buy the following BMW parts from the car manufacturer: supporting bearing 33 52 1 132 270, washer disc 33 52 1 136 063, disc 33 52 1 129 565
40 - Original struts need to be sent in advance for modification
41 - Coilover kits where the strut housings are delivered on exchange basis are only available in galvanized finish
62 - Not for cars with electronic damping
82 - Production on demand. Please ask for delivery time.
Write Your Own Review
KW coilovers online shop - all KW coilovers at low prices
We are an authorized KW partner and offer the entire KW range. Regardless of whether you opt for a height-adjustable KW V1 - V5 coilover suspension, a KW DDC coilover suspension or a KW Clubsport suspension with adjustable top mounts. TUNERSHOP is THE online shop for your new KW coilover kit.
For more than 15 years, KW has been the market leader and innovation driver as a manufacturer of individual suspension solutions for the road and in racing. No matter where in the world, sporty drivers, automobile manufacturers and refiners trust in KW coilovers "Made in Germany". Every KW coilover kit is subjected to extensive stress tests in production and developed and manufactured directly at the company headquarters in Fichtenberg, Germany, in order to meet the high standards of KW quality management.
KW Coilover Variant 3 for Tesla Model 3
The KW Coilover Variant 3 for the Tesla Model 3 offers a lowering of up to 55mm and ensures dynamic driving and a sportier look. ...
Read More » 
Official TUNERSHOP UK | Eibach, H&R and more
Online shops for wheels, lowering springs, suspensions and other tuning accessories in the UK. Fast delivery within a few days without additional import charges to UK. ...
Read More »